Tolerances for Needle
Roller Thrust Bearings| Bearing component | Tolerance | ||
| Dimensions | |||
| Needle
roller and cage thrust assemblies, AXK |
|||
| Bore diameter | d | E12 | |
| Outside diameter | D | c13 | |
| Roller diameter | Dw | G2, ISO 6193-1980 | |
| Raceway washers, LS | |||
| Bore diameter | d | E12 | |
| Outside diameter | D | a12 | |
| Thickness | B | h11 | |
| Axial runout | si | Normal, ISO 199 | |
| Thrust washers, AS | |||
| Bore diameter | d | E13 | |
| Outside diameter | D | e13 | |
| Thickness | B1 | ±0,05 mm | |
| Shaft washers, WS 811 | |||
| Bore diameter | d | Normal, ISO 199 | |
| Outside diameter | d1 | - | |
| Thickness | B | h11 | |
| Axial runout | si | Normal, ISO 199 | |
| Housing washer, GS 811 | |||
| Outside diameter | D | Normal, ISO 199 | |
| Bore diameter | D1 | - | |
| Thickness | B | h11 | |
| Axial runout | se | Normal, ISO 199 | |